Accessories

Our goal was to design a solvent recycling system that is portable, easy to use, and affordable.

Direct To:   CM 216 and 230   |   CM 440   |   CM 80 and 150



StillClean Turns Any Solvent Washer Into A Recycling Solvent Washer





CM 216 and 230

Back to Top

Industrial drum mounted solvent parts washer. Built-to-last for years of reliable service. Equipped with flow-through brush and "stay-put" flexible spigot that directs and holds power rinse where you want it. For use with petroleum based solvents with a flash point over 104°F. Not to be used with chlorinated solvents.

Features

  • Removable screen filter for pump protection
  • Stay-put flexible metal spigot
  • Flow-through brush with adjustable fluid control
  • Durable baked on powder coated epoxy finish
  • Meets 0.75 freeboard requirements
  • Heavy-duty industrial grade pump
  • Spring loaded door closure with fusible link 165°F
  • Single on/off switch for pump and optional light kit
  • Galvanized drawn sink

Specifications 216 230
Overall Dimensions: 31" L x 21" W x 56" H 34½" L x 26½" W x 63" H
Inside Dimensions: 28" L x 18" W x 7½" D 32" L x 24" W x 7½" D
Shipping Dimensions: 32½" L x 22½" W x 15½" H 37" L x 28" W x 16" H
Weight: 54 lbs. 68 lbs.
Fluid capacity: 16 gallon (drum optional) 30 gallon (drum optional)
Maximum fluid depth: 24" 26½"
Minimum fluid depth: 8⅞" 8¼"
Load lift over: 36½" 37⅛"
Voltage: 115VAC/60HZ/1PH/1 Amp 115VAC/60HZ/1PH/1 Amp
Pump: Fractional Fractional



CM 440

Back to Top

Clean and Soak solvent parts washer. Equipped with pistol grip spray nozzle and "stay-put" flexible spigot that directs and holds power rinse where you want it. For use with petroleum based solvents with a flash point over 104°F. Not to be used with chlorinated solvents.

Features

  • Durable, baked on powder coated epoxy finish
  • Spring loaded door closure with fusible link 165°F
  • ¾" drain plug located on bottom front of the machine for easy draining
  • Stay-put flexible metal spigot
  • Pistol grip spray nozzle
  • Removable inside cabinet shelf

Specifications

  • Overall dimensions: 44" L x 24¼" W x 61" H
  • Inside dimensions: 43" L x 24" W x 17" D
  • Shipping dimensions: 48" L x 27½" W x 20½" H
  • Weight: 175 lbs.
  • Fluid Capacity: 40 gallon
  • Maximum fluid depth: 8¾"
  • Minimum fluid depth: 5¼"
  • Load lift over: 36"
  • Soaking depth: 9"
  • Voltage: 115V/60HZ/1PH/1 Amp
  • Pump: Fractional

Accessories

  • 54527 10 Micron filter kit
  • 59173 50 Micron filter kit
  • 02923 Heavy-duty light kit
  • 54961 Bolt-to-lid light kit
  • K7945 Flo-thru hose and brush
  • 50023-3 Parts tray



CM 80 and 150

Back to Top

Agitating lift solvent parts washer. Equipped with flow-through brush. Heavy-duty automated lift platform rises out of the solvent for easy loading and unloading parts. For use with petroleum based solvents with a flash point over 104°F. Not to be used with chlorinated solvents.

Features

  • Pre-set 120 psi filter regulator with auto drain
  • Lift operates on 120 psi air pressure
  • Flow-through hand held brush
  • 12-gauge tank thickness
  • Agitation speed adjustable from 0 to 160 agitations per minute

Specifications 80 150
Overall Dimensions: 52½" L x 34" W x 66½" H 64" L x 44½" W x 69½" H
Inside Dimensions: 44½" L x 27¼" W x 28" D 57" L x 37¾" W x 29⅞" D
Carrier Dimensions: 41½" L x 17½" W 53½" L x 27½" W
Shipping Dimensions: 56½" L x 36½" W x 56" H 66" L x 48" W x 51" H
Shipping Weight: 556 lbs. 750 lbs.
Fluid capacity: 80 gallons 150 gallons
Maximum fluid depth: 15¼" 17¼"
Minimum fluid depth: 9¼" 9¼"
Load lift over: 38" 41"
Load capacity: 250 lbs. 750 lbs.
Lift Requirements: [email protected] PSI [email protected] PSI
Voltage: 115V/60HZ/1PH/1 Amp 115V/60HZ/1PH/1 Amp
Pump: Fractional Fractional